Support Extension Notice SEN-005 ZA180A- all variants NG2000 – all variants NG4000 – all variants Fusion 1010 TOC1500 TOC1500HP
Resource ID
4056
Access
Open
Contributed by
Sam Ward
Updated date
22 February 21
Title
Support Extension Notice SEN-005 ZA180A- all variants NG2000 – all variants NG4000 – all variants Fusion 1010 TOC1500 TOC1500HP
Keywords
ZA180A, NG2000, NG4000, Fusion 1010, TOC1500, TOC1500HP
Product Range
Genius
Language
UK English
Company Brand
Peak Scientific
Extracted text
Support Extension Notice
SEN-005
ZA180A- all variants
NG2000 – all variants
NG4000 – all variants
Fusion 1010
TOC1500
TOC1500HP
Issued by: Peak Scientific
© Peak Scientific 2021
Rev 1
05/02/2021
Page 1 of 3
SCOPE
The purpose of this document is to inform of extension of product support for products
within the discontinuation phase and, where applicable, advise of any new or alternative
models that replace the discontinued products. This notice supersedes previous
notices issued for these products.
Product(s) Affected by this notice
The following product(s) are affected by this notice, where applicable the replacement
models and replacement part numbers are shown.
Part No
Model
Support Level
Extension Until
All issued
ZA180A
Full Support
March 31st 2023
Replacement Model
Precision Zero Air 18L
+ Precision Air
Compressor
All issued
NG2000
Full Support
March 31st 2023
NG3000
All issued
NG4000
Full Support
March 31st 2023
NG5000
Part No
60-0018/0019 +
65-0555/1555
10-2210 / 10-2211 /
10-2230
10-2310 / 10-2320 /
10-2330
Precision Nitrogen
Trace 600cc,
All issued
Fusion 1010
Full Support
March 31st 2023
62-0600/0601, 60-
Precision Zero Air
1500/1501 +
1.5L + Precision Air
65-0555/1555
Compressor
All issued
TOC1500
Full Support
March 31st 2026
TOC 1000
3301941 / 3302384
All issued
TOC1500HP
Full Support
March 31st 2026
TOC 1000
3301941 / 3302384
Effective Date
The extended support takes effect with the issue of this notice, products listed above are
discontinued but fully supported until the date shown above.
Service and Support
Service kits and spare parts will be made available for these products until the support
period end, after this time we will endeavor to provide support for a further period of 1
year on a ‘best efforts’ basis. Peak protected service plans are available until the date
Issued by: Peak Scientific
© Peak Scientific 2021
Rev 1
05/02/2021
Page 2 of 3
shown above. Full support and best effort support periods may vary depending on future
availability of spare parts.
Please contact your Peak Scientific account manager if you have a requirement for
service kits/ spares, or a Peak Protected service plan.
Issued by: Peak Scientific
© Peak Scientific 2021
Rev 1
05/02/2021
Page 3 of 3