Corona Nitrogen 1010 - Installation Guide (Korean)
Original PDF File |
1.7 MB | Download |
View directly in browser |
1.7 MB | View in browser |
Resource ID
2996
Access
Open
Contributed by
Derek Rennie
Updated date
06 July 21
Review date
01 May 24
Title
Corona Nitrogen 1010 - Installation Guide (Korean)
Revision Number
3
Revision Details
Fittings Kit Update - LC
Keywords
Corona, Nitrogen, 1010, Installation, Guide, Korean
Product Range
Other
Company Brand
Peak Scientific
Please Note Only Pages 5-9 are in Korean.
Extracted text
Corona 1010
Installation Guide
Corona 1010 Installation Guide Rev 3 Korean RSID 2996 06/07/21
Change History
Rev
Comment
Name
Date
1
Initial Release
L. Couttie
09/04/2019
2
3
Naming Convention Update
Fittings Kit Update
L. Couttie
L. Couttie
10/10/2019
06/07/2021
How to use this Manual
This installation guide is intended to be used as a step by step, quick start guide, to
facilitate installation and configuration.
Please visit www.peakscientific.com/downloads to
download the full User Manual for your gas generator.
Thank you for selecting Peak Scientific to meet your Gas Generation needs, and should
you require any further assistance or support please do not hesitate to contact Peak
Scientific or Peak Partner from which you purchased your Generator.
Page 2
Safety Notices
Peak Scientific Instruments cannot anticipate every possible circumstance which may
represent a potential hazard. The warnings detailed within this document detail the
most known potential hazards, but by definition cannot be all inclusive. If the user
employs an operating procedure, item of equipment or a method of working which
is not specifically recommended by Peak Scientific, the user must ensure that the
equipment will not be damaged or become hazardous to persons or property.
Symbols
This document uses the following symbols to highlight specific areas important to the
safe and proper use of the Generator
WARNING
A WARNING notice denotes a hazard. It calls attention to an operating procedure,
process or similar, which if not correctly performed or adhered to, could cause
personal injury or in the worst case death. Do not proceed beyond a WARNING
notice until the indicated conditions are fully understood or met.
CAUTION
A CAUTION notice denotes a hazard. It calls attention to an operating procedure,
process or similar, which if not correctly performed or adhered to, could cause
damage to the Generator or the Application. Do not proceed beyond a CAUTION
notice until the indicated conditions are fully understood or met.
Caution, risk of electric shock. Ensure power to the Generator has been removed
before proceeding.
Safety Notice to Users
WARNING
WARNING
These instructions must be read thoroughly and understood before
installation and operation of your Peak Corona 1010 Generator. Use of
the Generator in a manner not specified by Peak Scientific MAY impair
the SAFETY provided by the equipment.
When handling, operating or carrying out any maintenance, personnel
must employ safe engineering practices and observe all relevant local
health and safety requirements and regulations. The attention of UK
users is drawn to the Health and Safety at Work Act 1974, and the
Institute of Electrical Engineers regulations.
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
WARNING
Page 3
Fittings Kit
x1
US Mains Cable C13 6-15 04-1029
x3m
1/4” Teflon Tubing 00-1266
x1
US Mains Cable C13 5-15 04-1039
x1
UK Mains Cable C13 04-1028
x3
1/4” x 1/4” Compression Fitting 02-4421
x1
EU Mains Cable C13 04-1038
Page 4
1.
WARNING
0°
0°
배송 상자에서 장비를 꺼낸 후에 설치를 원하는 장소의 평평한 곳에 올려놓으세요.
주의사항 : 해당 장비는 두명의 남자가 안전하게 들어서 올리는 것을 권장합니다.
2.
02-4421
해당 장비에 동봉된 1/4” 압축 피팅을 사용하여 장비 뒷면의 “AIR IN”과 “NITROGEN”에 사진과
같이 연결하세요.
Page 5
3.
00-1266
00-1266
제공된 1/4”테프론 튜브 (00-1266)를 “AIR IN”및 “NITROGEN”포트에 연결합니다. 튜브의 다른
쪽 끝을 기기의 가스 주입구에 연결합니다.
4.
CAUTION
04-1028/04-1029/04-1038/04-1039
제공된 피팅 키트(설치제공키트)에서 적절한 케이블을 선택하여 “IEX 60320/C13” 케이블을
장비 뒷편의 메인 소켓에 연결하세요. (단, 110V와 230V US 케이블이 모두 공급되므로, 국내에
맞는 230V 케이블 소켓을 사용해 주세요.)
Page 6
5.
UK
EU
US
110V
US
230V
CAUTION
110-230VAC 50/60Hz
메인 케이블을 해당되는 “110-230VAC 50/60 HZ” 단상에 연결해 주세요. (단, 적절한 메인
케이블 사용을 권장하며, 국내의 경우는 230VAC로 사용됩니다.)
6.
장비의 뒷편에 “POWER” 스위치를 눌러서 장비를 켜주세요.
Page 7
7.
YELLOW
장비의 정상상적으로 시작되면 정면에 LED가 노란색(주황색)으로 점등됩니다.
8.
GREEN
장비의 LED가 녹색을 나타내면서 사용 준비가 완료됨을 나타냅니다.
Page 8
9.
/
CONGRATULATIONS
이제 모든 장비의 설치가 정상적으로 완료되었으며 작동 및 사용이 가능합니다.
Page 9
General Notes
Electrical requirements are 110-230VAC nominal +/- 10% depending on chosen model.
However, running continuoulsy at voltages outwith this is not recommended. Extended
periods at extremes can have a detrimental effect on the operation and life of the
Generator.
Please familiarise yourself with the full User Manual available at www.peakscientific.
com/downloads This includes all other technical specifications, operating
instructions, service requirements, contact details and trouble shooting.
If you are using the Corona Air Compressor as your air supply, please refer to the
Corona Air Compressor Installation Guide, available at www.peakscientific.com/
downloads
Page 10
Go Online or Complete and Return
We know that registering any of your recently purchased products is not the
first thing on your mind- but it is very important to both of us. Not all warranties
are alike and Peak Scientific stand out against other gas suppliers as we offer
a comprehensive on-site warranty. This means that in the very unlikely case
that your gas generator develops a fault we have rapid support teams on-hand
throughout the globe who are able to come to your lab and get you back up
and running in no time.
Register for your comprehensive 12 month on-site warranty with ease online at
www.peakscientific.com/protected.
Alternatively, you can send the completed form to Peak Scientific by post or
email at warranty@peakscientific.com.
Go Online or Complete and Return
You can register for your FREE 12 month Warranty with ease online at
www.peakscientific/protected.
Alternatively, you can send the completed form to Peak Scientific by post or
email at warranty@peakscientific.com.
Product Warranty Registration
Contact name
Email address
Company
Address
City/town
Postcode
Country
Telephone
Generator serial #
Model type
Installation date
Do you still use an
alternative gas solution i.e.
cylinders or bulk liquid?
Yes
What gas requirements do
you have in your lab?
Hydrogen
No
Nitrogen
Zero Air
Extend your cover with
Peak Scientific offer comprehensive gas generator after sales support packages.
Peak [Protected] aftercare support can guarantee an on-site response within
72 hours*, genuine parts from our ISO9001 approved factory and a 95% first-time
fix rate. See our enclosed Peak [Protected] leaflet for further information.
Important!
You have 1 month to register your Peak Scientific product from the date of installation. Once registered
the warranty will be honoured for a period of 12 months. If you wish to defer the installation of your
generator, you must notify Peak Scientific immediately by emailing warranty@peakscientific.com.
For generators that remain unregistered after 1 month from the shipment date, the warranty will be
considered active from the date of factory dispatch.
* Complete Plan only
Important!
You have 1 month to register your Peak Scientific product from the date of
installation. Once registered the warranty will be honoured for a period of 12
months. If you wish to defer the installation of your generator, you must notify
Peak Scientific immediately by emailing warranty@peakscientific.com For
generators that remain unregistered after 1 month from the shipment date, the
warranty will be considered active from the date of factory dispatch.
Page 11
Please visit www.peakscientific.com/downloads to
download the full User Manual for your gas generator.
Peak Scientific has highly trained, fully certified Field Service Engineers located in over 20 countries
across every continent around the world. This allows us to provide an industry-leading rapid response
service to our customers. With [Peak Protected], your laboratory’s productivity becomes our top
priority.
To discuss Peak Protected generator cover and payment options speak to your local Peak
Representative or for further information contact: protected@peakscientific.com
Peak Scientific
Fountain Crescent
Inchinnan Business Park
Inchinnan
PA4 9RE
Scotland, UK
Tel: +44 141 812 8100
Fax: +44 141 812 8200
For further information on any of our
generator products please contact
marketing@peakscientific.com
Corona 1010 Installation Guide Rev 3 Korean RSID 2996 06/07/21