Planned Discontinuation Genius 3055 - PDN-009 

Extracted text

Planned Discontinuation Notice
Genius 3055

Scope
The purpose of this document is to serve notice of the pending discontinuation of a product, to advise
whether and how long orders are going to be accepted for and advise of any new or alternative models
that will replace the discontinued product.

Product(s) Affected by Planned Discontinuation Notice
The following product(s) are affected by this notice, where applicable the replacement models and
replacement part numbers are shown.

Part Number(s)

Model

Replacement options

Part Number

10-6355

Genius 3055

Halo

3300825

10-6365

Last Quotation/Order Date
Following the release of this notice, no new quotations for the affected products shall be issued. Please
refer to the list of suitable replacement products for all new incoming enquiries.
The last order date for the affected part numbers will be September 30th, 2019. Thereafter the model will
be discontinued, and the manufacturing of this product will cease.

End of Life Phase
For any existing offers and quotations pre-dating this notice Peak Scientific will endeavor to fulfil incoming
orders if placed on or before September 30th, 2019; due to reduction in stock levels we will not be able to
fulfil any orders placed thereafter.

Doc PDN-009

Revision: 01

© Peak Scientific 2019

Date: 16/07/2019

Issued by: P. Gierga

Service and Support
Peak Scientific typically offer service and support for discontinued products for a minimum period of 5
years. This is a guideline only, Service and Support provisions for the affected products will be confirmed
and communicated upon final discontinuation of these products in September 2019.

Doc PDN-009

Revision: 01

© Peak Scientific 2019

Date: 16/07/2019

Issued by: P. Gierga