Genius XE - Unpacking Instructions 

Extracted text

Genius XE Series (All Models)
Unpacking Instruction
Please note, the unpacking process requires 2 people  

1.

2.

Cut the plastic strapping and remove.

Remove cardboard lid, protective foam
packaging and cardboard sleeve. Remove
the plastic covering the generator.

3.

4.

Remove the four screws shown, these will
be marked in red and remove the front bar.

Place the front bar against the front of the
pallet. Failure to complete this step can
cause damage to the generator.

5.

6.

Attach the ramps to the front of the pallet
using the hook and loop straps. Ensuring
they are alligned with the wheels.

Release the brakes and carefully manoeuvre
Generator down the ramps and into final
position.
Important information on reverse side. 

 Important information on reverse side.

ATTENTION
Register product to
operate and activate
2 year comprehensive
on-site warranty

Copyright © Peak Scientific Instruments Ltd 2018 — Genius XE Unpacking Instruction Rev 1 PN 3301629 RSID 2503 EN —07/06/2018