Solaris XE for Waters - Brochure 

Extracted text

Your local gas generation partner
A

gas generation brand

Solaris XE for Waters™
Dedicated nitrogen solution for
ACQUITY™ QDa™ Detector

Discover more at www.peakscientific.com/solaris-waters

Why choose Solaris XE
for Waters for your
ACQUITY QDa nitrogen
needs?
)

High purity nitrogen on demand
Nitrogen up to 35L/min, up to 116 psi and up to 99.5% purity.

)

Small laboratory footprint
Compact, wall-mountable and stackable*with Waters ACQUITY QDa,
maximizing the use of valuable laboratory floor or bench space.

)

Tested and approved by Waters
Manufactured and tested to the highest specification in the UK and fully
compliant with CE/FCC/CSA certifications.

)

Safe and convenient gas supply
Eliminate recurring costs of ordering and hazards of handling high
pressure gas cylinders or dewars. Few moving parts means systems are
low maintenance and low noise.

)

High quality engineering
Designed, engineered and tested to highest standards at our UK ISO 9001
accredited manufacturing center.

2

Approved nitrogen generator for
Waters ACQUITY QDa
Solaris XE for Waters has been designed by Peak Scientific in collaboration with Waters and
is the only compressor-free nitrogen generator available which has been tested and approved
by Waters for use with the ACQUITY QDa Detector.
The dimensions and locating features of Solaris XE for Waters ensure that it can be
positioned within specific Waters LC QDa stacking configurations*, providing a compact and
discreet space-saving solution within the lab. Alternatively this unit can be wall mounted or
free standing on a lab bench.
*Please ask your local sales representative for advice on supported stacking configurations.

Installation and compressed air supply
With global coverage and decades of expertise in gas generation in the lab, we can
provide direct support, advice and guidance on specification and installation of
your Solaris XE N2 system. Please talk to your local Peak Scientific representative
for assistance in selection and installation in your facility – that’s where we excel.
As Solaris XE does not contain internal air compressors, a supply of clean dry
compressed air (conforming to ISO 8573-1:2010 Class 1.4.1) is required to operate
the system. This may be available in your laboratory already, but if not, we can assist
in supply or recommendations to install an external compressed air system suitable
for your generator. Normally this would be located elsewhere outside the laboratory
to minimize noise and vibration.

3

Solaris XE for Waters
Technical Specifications

Solaris XE for Waters

Max Flow Rate

up to 35 L/min

Max Pressure

up to 116 psi / 8 bar (user adjustable)

Purity

95% - 99.5%*

Gas Outlets

1 x 1/4 “ BSPP

Min/Max Air Inlet Pressure

80 psi/5.5 bar - 145 psi/10 bar (116 psi/8 bar required for QDa)

Min Inlet Air Quality

ISO 8573-1:2010 Class 1.4.1

Contaminants

Phthalate & BHT Free

Suspended Liquids

None

Operating Temperature

5°C - 30°C / 41°F - 86°F

Electrical Requirements

Universal 100 / 230 VAC / 50 / 60 Hz / 0.03 A

Power Consumption

6.9 Watts

Heat Output

25 BTU/Hr
156 x 343 x 650 mm
6.2 x 13.5 x 25.6’’
15.1 kg / 33.3 lbs

Generator Dimensions (HxWxD)
Generator Weight
Max Weight Bearing Capability

100 kg / 220.5 lbs

Solaris Compressor compatible

NO

*depending on inlet air pressure and outlet flow

Ordering Information
Part Number
Annual Service
FPPM Maintenance Plan
Complete Maintenance Plan
Supported Maintenance Plan

3300670
www.peakscientific.com/ordering
3300671-FPPM
3300671-CSP
3300671-SMP

World Class Customer Service
With all Peak Scientific products comes industry leading support from [Peak Protected]™ . With Peak certified engineers located across
the globe you can be sure that on-site product support is never far away. With Peak, gas is one less thing for your lab to worry about.

24 Hour Response
Rapid response service engineer network,
guaranteed on-site within 72 hours globally,
48 or 24 hours available in some regions.

Installation

A dedicated Peak engineer will visit
your lab to install and setup your
generator.

Manufacturer Approved Parts
All components are engineered
and tested to ensure optimal
performance in your generator.

Certified Engineers
Over 100 dedicated, fully certified direct Peak
Service Engineers globally, with expert knowledge
in troubleshooting and fixing any generator.

95% First Time Fix
Having dedicated Peak engineers around
the world means most issues are resolved
on first visit – 95% of the time in fact.

Global 24hr Technical Support

Around the clock support by phone or
online with our global technical helpdesk.

Contact us today to discover more!
Web: www.peakscientific.com/solaris-waters Email: discover@peakscientific.com

Copyright © Peak Scientific Instruments Ltd 2019 — Solaris XE for Waters Rev 3 PN TBC RSID 3163 EN —25/11/2019