PureAir - Data Sheet 

Resource downloads

File information File dimensions File size Options

Original PDF File

1.3 MB Download

Screen

566 × 800 pixels (0.45 MP)

4.8 cm × 6.8 cm @ 300 PPI

85 KB Download

Preview

Full screen preview

85 KB View
Resource details

Resource ID

456

Access

Open

Contributed by

Liam Couttie

Updated date

24 May 18

Review date

01 May 19

Title

PureAir - Data Sheet

Revision Number

3

Revision Details

Extending resource date.

Product Range

Other

Language

UK English

Company Brand

Peak Scientific

Public / Private

public

Extracted text

PureAir

Compressed Air Pre-filtration System
Part Number : See back page

Service Kit : Contact us for details

Your local gas generation partner

Description
PureAir is a fully integrated and combined compressed air dryer and
pre-filtration system designed to remove moisture, dust particulates
and hydrocarbons. Delivering a robust, energy efficient and hasslefree compressed air purification for those critical applications where
optimum quality ISO8573-1:2010 Class 1.2.1 compliant air source is
required. PureAir conveniently integrates pre-filters, desiccant dryers,
carbon bed purifiers and post filters into one compact and easy to
install unit*. PureAir is the recommended pre-filtration solution to
ensure optimum quality inlet gas and full system protection for Peak’s
iFlow high purity, high flow nitrogen generator system.
*Requires minimal lifetime maintenance, namely desiccant cartridge replacements.

Applications
)

-iFlow

)

-iFlowLab

PureAir 150-300 models

Key Features
)

)

Recommended air pre-filtration system for Peak i-Flow and
Peak i-FlowLab nitrogen generators

)

Can be used for applications requiring very high quality
compressed air

)

Single system for quicker installation and lower costs

)

Low on-going maintenance costs - hassle free

)

Compact, low footprint making most of available space

)

Fully compliant with ISO8573-1:2010 Class 1.2.1
(Contaminants and purity classes)

)

For use with even with oil-free compressors, PureAir
removes any contaminants from its source

)

Robust system protection, preventing contaminants
entering vulnerable components down-stream

)

Smart energy efficient system, with ultra-economy modes
on the larger models (>150 m3/hr)

)

1140 mm

Fully integrated pre-filtration, post-filtration, drying and
carbon purifier

Self-diagnostics, measures flow into the system and higher
flow models measure dryness in the system

680 mm

PURE - AIR

PureAir 150-300 models

Copyright 2015 Peak Scientific - Pure Air Data sheet Rev 3 RSID 456 EN - 22/05/18

Why specify PureAir pre-filtration?
Many critical applications require an advanced pre-filtration system, the Peak PureAir comes with additional components, namely
a triple pre-filter, desiccant dryer technology, and carbon beds for hydrocarbon removal and smart control technology. The
additional pre-filters allow the PureAir to ensure the removal of impurities at higher flow rates, from 150m3/hr to 375m3/hr (with
larger flows available upon request) the smart control technology measures the dryness (PDP) or the volumetric flow of the
air in the system. Communicating this to the desiccant dryer, PureAir will dry the air at the most efficient rate, controlling and
minimizing the purge loss, whilst also allowing parameters to be set on some units, therefore reducing the electrical demands of
the upstream compressor and decreasing electrical running costs.
Peak can maintain the PureAir system, protecting the productivity of the operating facility, reducing downtime and lengthening
the life of the system.

Fully integrated pre-filtration - system example

12

13

14

15
16

03
02

04

Addtional units replaced by
Peak PureAir System

PUREAIR

07
01

ISO 8573-1:2010
Class 1.2.1 Air Quality
(critical to meeting the
optimal standard of
the feed air.)

08
06

05

Description

Ref

Description

Ref

Description

1

Compressor

5

Auto Condensate Drain

12

1 µm Coalescing Filter

2

Wet Air Receiver

6

Oil/Water Separator (Optional)

3

Pressure Release Valve

7

Bulk Water Separator (Optional)

4

Pressure Gauge

8

Peak PureAir System

Alternative to
Peak Pure Air
System

Ref

13

0.01 µmCoalescing Filter

14

Desiccant Dryer (-40° Cpdp)

15

Carbon Bed

16

Post Filter

PureAir quality
Refrigerated air dryers, are used to supply compressed air for a

Pressure Dewpoint of air from the PureAir system is up to 60

vast array of applications but in many cases the air produced by

times dryer than air delivered from a refrigerated air dryer

these systems contains high water vapor content not suitable

(when processed through the PureAir desiccant dryer at a

for most applications.

-40°F (-40°C) as opposed to a refrigerated dryer with a +37.4°F
(+3°C) PDP).

Furthermore, refrigerated air dryers also operate at a higher
Pressure Dewpoint, allowing the growth of micro-organisms,

Peak PureAir achieves a quality equal to, or better than ISO8573-

additional contaminants to air which are not suitable for

1:2010 Class 1.2.1. Suitably designed and specified for the

applications where accuracy is critical such as food & beverage,

deployment site with all relevant correction factors calculated

medical, pharmaceuticals, electronics and breathable air. A

to ensure a consistent supply of highest quality, low particulate,

PDP of less than -26°C will inhibit the growth of any micro-

-40°C PDP, and residual oil vapor of
organisms in the air distribution lines.

Typical Applications

Clinical Applications

Food & Beverage

Manufacturing

))

- Dentistry air

))

- Food testing

))

- Advanced pneumatics

))

- Pharmaceutical products

))

- Food packaging

))

- Plastic injection molding

))

- Medical air

))

- Dairy

))

- Hard disk manufacturing

))

- Cosmetics

))

- Breweries

))

- Forging

Smart Economics
When installed with a Peak i-Flow or i-FlowLab system, the

By integrating and correctly maintaining a Peak PureAir with

PureAir can be used to supply a wide variety of applications

a nitrogen generation system, the efficiency and longevity of

including modified atmosphere packaging, metallurgy, laser

the CMS will be maintained allowing for a long and productive

cutting, electronic component supply, purging and plastic

operational life.

injection molding.
In order to optimize the PureAir for its specific purpose, a Peak
The cost of operating conventional air dryers can be high,

engineer will manage the installation conforming with ISO8573-1.

especially if not set-up correctly. Regeneration of expelled gas

The PureAir system’s installation will be positioned in your

from desiccant drying alone can account for up to 80% of total

facility to maximize its performance, as near as possible to the

operation costs. At higher flow rates this cost is exacerbated

application, whilst minimizing hassle to the user.

and the PureAir system has been designed to alleviate these
costs, providing substantial savings on energy consumption.

Peak PureAir

0150

0175

0225

0300

0375

Volume flow in m3/h

150

175

225

300

375

Regeneration air losses

23.0

26.3

34.0

45.0

56.0

Volume flow out

121.7

142.7

183.2

244.7

306.1

Pressure loss initial mbar

290

170

190

240

350

Dimensions
Width mm (inch)

1140 (44.88)

1580 (62.20)

Height mm (inch)

1980 (77.95)

2190 (86.22)

Depth mm (inch)

680 (26.77)

770 (30.31)

Ordering Information
Part Number (110V / 60Hz)

20-8210

20-8211

20-8212

20-8213

20-8214

Part Number (240V / 50 Hz)

20-8110

20-8111

20-8112

20-8113

20-8114

(*) All performance data is based on 7 bar(g) inlet air pressure & 35 deg C ambient temperature. Flow reference conditions, 1 bar (abs), 20 deg C correction factors required for all other input parameters. Please contact your Peak technical representative for more information.

Peak Scientific gas generators define the benchmark in reliability, convenience and performance in laboratories around the world,
and come backed by a 12 month warranty. Beyond this period however you can ensure that you’re investment continues to be
[Protected] by our comprehensive generator care cover.
Our world-class aftercare support packages deliver a program of scheduled preventative maintenance whilst giving you the
reassurance of instant access to worldwide technical support and priority on-site response in the untimely event of a breakdown.

Peak Scientific UK
Tel: +44 (0)141 812 8100
Fax: +44 (0)141 812 8200
Peak Scientific North America
Tel: +1 866 647 1649
Fax: +1 978 608 9503

Product Certifications
Peak Scientific’s Quality
Management System
conforms to: ISO:9001:2008

For a full list of our worldwide
office locations, please visit:
Web: www.peakscientific.com
Email: marketing@peakscientific.com

Copyright © Peak Scientific Instruments Ltd 2018 — Pure Air Data sheet Rev 3 RSID 456 EN —22/05/2018

Search for similar resources

Remove