Infinity 1051 - Installation Guide 

Resource downloads

File information File dimensions File size Options

Original PDF File

1.0 MB Download

Screen

566 × 800 pixels (0.45 MP)

4.8 cm × 6.8 cm @ 300 PPI

44 KB Download

Preview

Full screen preview

44 KB View
Resource details

Resource ID

290

Access

Open

Contributed by

Liam Couttie

Updated date

-

Review date

03 May 19

Title

Infinity 1051 - Installation Guide

Revision Number

1

Keywords

12

Product Range

Infinity

Language

UK English

Company Brand

Peak Scientific

Public / Private

public

Reviewed on 3rd May 2017 - LC

Extracted text

Installation Guide – Infinity 1051 Generator
FITTINGS KIT

Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK

T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com

Part No. IG-Infinity1051
Rev.
1
Page

Page 1 of 5

INSTALLATION
1.

2.

Unpack the generator from
the shipping crate and place
on a flat surface.

3.

The generator can be wall
mounted, shown above
are the distances required
between fittings.

4.

Using the wall plugs and
screws provided, mount the
generator to the wall in the
desired location.

5.

¼”
Teflon

Select the ¼” compression fittings and attach
to the ‘NITROGEN’ and ‘AIR’ ports. It is
recommended that PTFE tape is applied to the
threads to ensure a leak-tight fit.

Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK

Select the ¼” Teflon Tube and connect to
the ‘NITROGEN’ and ‘AIR’ ports. If using
the compression fitting ensure the internal
olive is crimped securely.

T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com

Part No. IG-Infinity1051
Rev.
1
Page

Page 2 of 5

6.

7.

Connect the other end of the Teflon Tube
to the instrument gas inputs; again ensure
the fittings are securely fastened.

Attach house air supply to BA filter at left side
of generator. Ensure valve on filter is at the
open position.

8.

CONGRATULATIONS
Your PEAK SCIENTIFIC gas generator is now fully installed, operational and ready to
supply gas on demand to your instrument.

Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK

T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com

Part No. IG-Infinity1051
Rev.
1
Page

Page 3 of 5

General Notes
*
The 8m length of Teflon tube supplied in the fittings kit is to allow the
generator to be installed adjacent to the instrument it is supplying. If the generator is
to be installed further away from the instrument then attention needs to be paid to
pressure drops that could occur. The maximum distance away from the instrument
the generator can be placed still using 6mm (4mm internal diameter) or ¼” (3/16”
internal diameter) tubing is 10m. For further information relating to tubing lengths
please refer to the user manual.

For all other technical specifications, operating instructions, service
requirements, contact details and trouble shooting, please refer to
the user manual contained on the CD supplied in the fittings kit.
Please keep this for future reference.

9.
It is very important to register your generator with PEAK SCIENTIFIC. This will initiate your
warranty entitlement. Please use the form on the next page to register your generator. You
will need the generators serial number which can be found on the serial label on the rear of
the generator.

Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK

T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com

Part No. IG-Infinity1051
Rev.
1
Page

Page 4 of 5

Warranty Entitlement

Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK

T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com

Part No. IG-Infinity1051
Rev.
1
Page

Page 5 of 5

Search for similar resources

Remove