Corona Air Compressor - User Manuals (Korean)
Original PDF File |
1.7 MB | Download |
View directly in browser |
1.7 MB | View in browser |
Resource ID
2997
Access
Open
Contributed by
Derek Rennie
Updated date
15 April 19
Review date
01 May 24
Title
Corona Air Compressor - User Manuals (Korean)
Revision Number
1
Revision Details
Initial Release - LC
Keywords
Corona, Air, Compressor, User, Manuals, Korean
Product Range
*None
Company Brand
Peak Scientific
Please Note Only Pages 5-11 are in Korean.
Extracted text
Corona Air Compressor
Installation Guide
Corona Air Compressor Installation Guide Rev 1 Korean 09/04/19
Change History
Rev
Comment
Name
Date
How to use this Installation Guide
This document is intended to be used only as a Quick Start Guide, to facilitate safe and
correct installation and initial configuration of your Peak Scientific gas generator.
For more extensive user operation directions, we recommend you download the User
Manual from the website.
Please visit www.peakscientific.com/downloads to
download the full User Manual for your Air Compressor.
Thank you for selecting Peak Scientific to meet your laboaratory gas generation needs,
and should you require any further assistance or support please do not hesitate to
contact Peak Scientific or Peak Partner from which you purchased your air compressor.
Page 2
Safety Notices
Peak Scientific Instruments cannot anticipate every possible circumstance which may
represent a potential hazard. The warnings detailed within this document detail the
most known potential hazards, but by definition cannot be all inclusive. If the user
employs an operating procedure, item of equipment or a method of working which
is not specifically recommended by Peak Scientific, the user must ensure that the
equipment will not be damaged or become hazardous to persons or property.
Symbols
This document uses the following symbols to highlight specific areas important to the
safe and proper use of the air compressor.
WARNING
A WARNING notice denotes a hazard. It calls attention to an operating procedure,
process or similar, which if not correctly performed or adhered to, could cause
personal injury or in the worst case death. Do not proceed beyond a WARNING
notice until the indicated conditions are fully understood or met.
CAUTION
A CAUTION notice denotes a hazard. It calls attention to an operating procedure,
process or similar, which if not correctly performed or adhered to, could cause
damage to the air compressor or the application. Do not proceed beyond a CAUTION
notice until the indicated conditions are fully understood or met.
Caution, risk of electric shock. Ensure power to the Air Compressor has been
removed before proceeding.
Safety Notice to Users
WARNING
WARNING
These instructions must be read thoroughly and understood before
installation and operation of your Peak Corona Air Compressor. Use of
the air compressor in a manner not specified by Peak Scientific MAY
impair the SAFETY provided by the equipment.
When handling, operating or carrying out any maintenance, personnel
must employ safe engineering practices and observe all relevant local
health and safety requirements and regulations. The attention of UK
users is drawn to the Health and Safety at Work Act 1974, and the
Institute of Electrical Engineers regulations.
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
WARNING
Page 3
Fittings Kit
x1
US Mains Cable C13 6-15 04-1029
x3m
1/4” Teflon Tubing 00-1266
x1
US Mains Cable C13 5-15 04-1039
x2
1/4” x 1/4” Compression Fitting 02-4421
x1
UK Mains Cable C13 04-1028
x1
EU Mains Cable C13 04-1038
Page 4
x1
2.5mm Hex Key 00-5483
1.
WARNING
0°
0°
배송 상자에서 장비를 꺼낸 후에 설치를 원하는 장소의 평평한 곳에 올려놓으세요.
주의사항 : 해당 장비는 두명의 남자가 안전하게 들어서 올리는 것을 권장합니다.
2.
로부터 정면패널을 앞쪽으로 당겨서 분리하세요.
Page 5
3.
그 다음에 정면패널을 위쪽으로 올려서 당겨서 - 올려서 Air Compressor로부터 분리하세요.
4.
CAUTION
00-5483
이제는 함께 공급된 육각렌치(00-5843)을 사용하여 그림과 같이 2개의 나사를 제거한 뒤에
왼쪽의 패널을 분리해주세요.
Page 6
5.
이때에, 왼쪽 패널을 당신의 방향으로 당겨서 제거할 수 있습니다.
6.
왼쪽 패널을 제거하면 고정브라켓(지지대)에 닿을 수 있습니다. 이 부품은 Compressor의
하단부에 위치하며 “Remove Before Use”라는 문구로 적힌 스티커입니다. 이 고정브라켓을
제거하기 위해서는 그림과 같이 4개의 나사를 먼저 제거하세요.
Page 7
7.
이제는 Compressor 받침대 아래로부터 브라켓을 끄집어낼 수 있습니다.
8.
왼쪽 패널을 다시 장착하고 2개의 나사를 고정하세요.
Page 8
9.
정면 패널을 다시 장착한 후에 단단히 고정하세요.
10.
02-4421
공급된 1/4” 압축 피팅(02-4421)을 Air Output과 Drain 포트에 연결하세요.
이제는 1/4” 테프론 튜빙(00-1266)을 Air Output에 장착한 후에 Corona 질소 제네레이터의 다른
끝단에 연결하세요. 그리고, 남은 튜빙을 사용하여 Drain 포트에 장착한 후에 적당한 수분 배출통에
연결해주세요.
Page 9
11.
CAUTION
04-1028/04-1029/04-1038/04-1039
장착 키트에서 적절한 메인케이블을 Air Compressor의 뒷변에 mains input에 IEC 60320/C13
케이블 부분을 연결하세요.
단, 공급된 110V와 230V중에서 설치 장소의 환경을 고려하여 적절한 메인 케이블을
선택하세요.
12.
CAUTION
UK
EU
US
110V
US
230V
메인 케이블을 해당 110/230VAC 50/60Hz 단상전원에 연결하세요.
주의사항으로 설치장소의 전기 공급 환경에 맞는지 다시 한번 확인하세요.
Page 10
13.
Air Compressor의 뒷변에 위치한 POWER 스위치를 눌러주세요.
14.
/
CONGRATULATIONS
이제 피크사의 Corona Air Compressor 설치가 완료되었습니다.
Page 11
General Notes
* Electrical requirements are 110 or 230VAC nominal +/- 10% depending on chosen
model. However, running continuously at voltages outwith this is not recommended.
Extended periods at extremes can have a detrimental effect on the operation and life
of the air compressor.
Please familiarise yourself with the full User Manual available at www.peakscientific.
com/downloads This includes all other technical specifications, operating
instructions, service requirements, contact details and trouble shooting.
Page 12
Go Online or Complete and Return
We know that registering any of your recently purchased products is not the
first thing on your mind- but it is very important to both of us. Not all warranties
are alike and Peak Scientific stand out against other gas suppliers as we offer a
comprehensive, quick response, on-site warranty. This means that in the very
unlikely case that your gas generator develops a fault we have rapid support
teams on-hand around the world who are able to come to your lab and get you
back up and running in no time.
Register for your comprehensive 12 month on-site warranty with ease online at
www.peakscientific.com/protected.
Alternatively, you can send the completed form to Peak Scientific by post or
email at warranty@peakscientific.com.
Go Online or Complete and Return
You can register for your FREE 12 month Warranty with ease online at
www.peakscientific/protected.
Alternatively, you can send the completed form to Peak Scientific by post or
email at warranty@peakscientific.com.
Product Warranty Registration
Contact name
Email address
Company
Address
City/town
Postcode
Country
Telephone
Generator serial #
Model type
Installation date
Do you still use an
alternative gas solution i.e.
cylinders or bulk liquid?
Yes
What gas requirements do
you have in your lab?
Hydrogen
No
Nitrogen
Zero Air
Extend your cover with
Peak Scientific offer comprehensive gas generator after sales support packages.
Peak [Protected] aftercare support can guarantee an on-site response within
72 hours*, genuine parts from our ISO9001 approved factory and a 95% first-time
fix rate. See our enclosed Peak [Protected] leaflet for further information.
Important!
You have 1 month to register your Peak Scientific product from the date of installation. Once registered
the warranty will be honoured for a period of 12 months. If you wish to defer the installation of your
generator, you must notify Peak Scientific immediately by emailing warranty@peakscientific.com.
For generators that remain unregistered after 1 month from the shipment date, the warranty will be
considered active from the date of factory dispatch.
* Complete Plan only
Important!
You have 1 month to register your Peak Scientific product from the date of
installation. Once registered the warranty will be honoured for a period of 12
months. If you wish to defer the installation of your generator, you must notify
Peak Scientific immediately by emailing warranty@peakscientific.com. For
generators that remain unregistered after 1 month from the shipment date, the
warranty will be considered active from the date of factory dispatch.
Page 13
Page 14
Page 15
Please visit www.peakscientific.com/downloads to
download the full User Manual for your air compressor.
Peak Scientific has highly trained, fully certified Field Service Engineers located in over 20 countries
across every continent around the world. This allows us to provide an industry-leading rapid response
service to our customers. With [Peak Protected], your laboratory’s productivity becomes our top
priority.
To discuss Peak Protected generator cover and payment options speak to your local Peak
Representative or for further information contact: protected@peakscientific.com
Peak Scientific
Fountain Crescent
Inchinnan Business Park
Inchinnan
PA4 9RE
Scotland, UK
Tel: +44 141 812 8100
Fax: +44 141 812 8200
For further information on any of our
generator products please contact
marketing@peakscientific.com
Corona Air Compressor Installation Guide Rev 1 Korean 09/04/19