MS Bench - Brochure  

Extracted text

Your local gas generation partner
A

gas generation brand

MS Bench SCI
Modular LC-MS bench system
designed exclusively for SCIEX.

Discover more at www.peakscientific.com/sciex

Seamless integration
Laboratory grade workspace
Featuring a high-specification phenolic compact laminate benchtop,
the MS Bench SCI gives you over 7.5 square feet of durable, chemicalresistant work surface in your laboratory. Two models in the range provide
a modular, optimised solution for positioning your SCIEX LC-MS, with the
vac pump variant for the mass-spectrometer itself and the generator variant
recommended for locating the HPLC upon.

Noise abating vacuum pump enclosure
The MS Bench SCI is designed primarily as a workstation to locate your
SCIEX mass-spectrometer upon, with provision for vacuum pumps
(also known as roughing pumps) to be located inside the bench unit,
keeping noise and vibration to a minimum. The MS Bench SCI also
features up-rated extraction fans to effectively and safely manage heat
output from the pumps.

Ease of install and service
Both models are simple to install and easy to maintain, thanks to the
durable self-levelling castor wheels, easy connections on rear of unit
and all key servicing carried out from the front – meaning the MS
Bench SCI doesn’t need to be moved once installed. MS Bench SCI
benefits from an innovative system allowing the generator or roughing
pump mounting tray to be slid out the front, for easy access by trained
service professionals to conduct maintenance.

Key Features
•

Designed exclusively for SCIEX to provide modular bench solution for all SCIEX LC-MS instruments*

•

Noise abated compartment suitable for housing vacuum pump(s) (non generator variant only)

•

‘Genius Inside’: true plug & play gas generation for SCIEX mass-spectrometer (MS Bench (G) SCI 1 only).
No external compressed air source required.

•

Noise & vibration dampening, suitable for use as instrumentation bench

•

CSA / FCC / CE compliant

•

Chemical-resistant phenolic resin worktop

•

Self-levelling castor wheels for seamless installation with existing lab bench system
*MS Bench (G) SCI 1 gas output is suitable for all instruments except IVD medical devices, all SCIEX Benchtop MS can be placed on MS

2

Bench SCI 1. Vac Pumps for floor standing Triple TOFs can be placed inside MS Bench SCI 1.

Raising the bar with what’s under the bench
Developed exclusively for SCIEX, the MS Bench SCI range provides a modular workstation with provision for either
integrated gas generation or a noise abating enclosure for roughing pumps. MS Bench SCI is designed specifically
for use with the current and latest mass spectrometers at SCIEX.*
Two variants of the MS SCI Bench are available, both identical in form factor, aesthetics and work surface.
MS Bench (G) SCI features a self-contained gas generator, providing a reliable and cost-efficient source of both
nitrogen (Curtain Gas™) and clean, dry oil-free air for source and exhaust gas at flows and pressures configured to
meet SCIEX instrument requirements (excluding IVD medical device instruments). The other variant, the MS Bench
SCI, comes without the gas generator, instead providing a compartment below the bench, suitable for housing up to
two MS roughing pumps.

Stylish and ergonomic
Contemporary aesthetics and practical
industrial design define Peak products and
this is every bit the case with MS Bench SCI.
Styled to align seamlessly with the modern
look of SCIEX LC-MS instruments, and match
other bench/workstation elements available
separately from SCIEX, the MS Bench
features clean sharp lines, high grade finishes
and work surfaces. The front fascia is clutter
free, with discrete status LED lighting (system
ready, high duty) providing visual indication
at a glance.

Genius Inside
The MS Bench (G) SCI is a market innovation in combining LC-MS
workstation form factor with Peak’s validated and compliant Genius
‘plug & play’ gas generator technology (no external compressed air
source required) fully integrated inside the unit. With built-in high
performance compressors, and the same proven membrane, filtration
and dryer technologies used in the Genius 1024 (for SCIEX), the MS
Bench (G) SCI offers a unique space-saving solution.

3

MS Bench SCI
Technical Specifications

MS Bench SCI 1

MS Bench (G) SCI 1

Minimum Operating Ambient Temperature

5°C (41°F)

Maximum Operating Ambient Temperature

30°C (86°F)

Curtain Maximum Flow^

19 L/min @ 4.5 bar (0.67 cfm @ 65 psi)

Source Maximum Flow^

26 L/min @ 6.9 bar (0.92 cfm @ 100 psi)

Exhaust Maximum Flow^

25 L/min @ 4.1 bar (0.88 cfm @ 60 psi)

N/A

Particles

<0.01μm

Phthalates

None

Suspended Liquids

None

Fans

8 x Fans

Electrical Requirements

IO: 85-264 VAC 50/60 Hz,1 Amps

220 - 240v ±10% 50/60 Hz,7 Amps

200VA

1,100VA

784 BTU/hr

3753 BTU/hr

Noise abating to 54dB(A)

59dB(A)

465 x 650 x 470 mm
18.3 x 25.6 x 18.5”

630 x 290 x 680 mm
24.8 x 11.4 x 26.7”

Power Consumption
Maximum Heat Output
Noise Level
Usable Compartment Space (H x W x D)

762 x 914 x 787 mm /
30 x 36 x 31’’

MS Bench Dimensions (H x W x D)
MS Bench Weight

103kg (227.1 lbs)

160kg (352.8 lbs)

Max Weight Load

272kg (599.7lbs)

215kg (474lbs)

^NOTE – These performance characteristics are valid only when paired with an approved Sciex application. Please refer to current application matrix for a list of supported products.

Ordering Information
Part Number
Annual Service
Complete Maintenance Plan

3302382

3302383
visit: www.peakscientific.com/ordering

World Class Customer Service
With all Peak Scientific products comes industry leading support from [Peak Protected]™ . With Peak certified engineers located across
the globe you can be sure that on-site product support is never far away. With Peak, gas is one less thing for your lab to worry about.

24 Hour Response

Manufacturer Approved Parts

95% First Time Fix

Rapid response service engineer network,
guaranteed on-site within 72 hours globally,
48 or 24 hours available in some regions.

All components are engineered
and tested to ensure optimal
performance in your generator.

Having dedicated Peak engineers around
the world means most issues are resolved
on first visit – 95% of the time in fact.

Installation

Certified Engineers

Global 24hr Technical Support

A dedicated Peak engineer will visit
your lab to install and setup your
generator.

Over 100 dedicated, fully certified direct Peak
Service Engineers globally, with expert knowledge
in troubleshooting and fixing any generator.

Around the clock support by phone or
online with our global technical helpdesk.

Contact us today to discover more!
Web: www.peakscientific.com/sciex

Email: discover@peakscientific.com

Copyright © Peak Scientific Instruments Ltd 2020 — MS Bench Rev 8 PN TBC RSID 3038 EN —04/03/2020