Infinity 1051 - Installation Guide
Original PDF File3.4 MB |
Download |
View directly in browser3.4 MB |
View in browser |
Resource ID
290
Access
Open
Contributed by
Derek Rennie
Updated date
16 March 23
Review date
01 May 24
Title
Infinity 1051 - Installation Guide
Revision Number
2
Revision Details
Text Update - CD
Keywords
12
Product Range
Infinity
Language
UK English
Company Brand
Peak Scientific
Part Number
IG-Infinity1051
Reviewed on 3rd May 2017 - LC
Extracted text
Installation Guide – Infinity 1051 Generator
FITTINGS KIT
9
6mm PTFE Tubing
¼” BSPT x 6mm
Compression Fitting 02-4506
Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK
T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com
Part No. IG-Infinity1051
2
Rev.
Page
Page 1 of 5
INSTALLATION
1.
2.
Unpack the generator from
the shipping crate and place
on a flat surface.
3.
The generator can be wall
mounted, shown above
are the distances required
between fittings.
4.
Using the wall plugs and
screws provided, mount the
generator to the wall in the
desired location.
5.
6mm
PTFE
Tube
Select the ¼” x 6mm Compression Fittings
and attach to the ‘NITROGEN’ and ‘AIR’
ports. It is recommended that PTFE tape is
applied to the threads to ensure a leak-tight fit.
Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK
Select the 6mm PTFE Tube and connect
to the ‘NITROGEN’ and ‘AIR’ ports. If
using the compression fitting ensure the
internal olive is crimped securely.
T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com
Part No. IG-Infinity1051
Rev.
2
Page
Page 2 of 5
6.
7.
Connect the other end of the PTFE Tube
to the instrument gas inputs; again
ensure the fittings are securely fastened.
Attach house air supply to BA filter at left side
of generator. Ensure valve on filter is at the
open position.
8.
CONGRATULATIONS
Your PEAK SCIENTIFIC gas generator is now fully installed, operational and ready to
supply gas on demand to your instrument.
Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK
T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com
Part No. IG-Infinity1051
Rev.
2
Page
Page 3 of 5
General Notes
*The 9m length of Teflon tube supplied in the fittings kit is to allow the generator to
be installed adjacent to the instrument it is supplying. If the generator is to be
installed further away from the instrument then attention needs to be paid to
pressure drops that could occur. The maximum distance away from the instrument
the generator can be placed still using 6mm (4mm internal diameter) or ¼” (3/16”
internal diameter) tubing is 10m. For further information relating to tubing lengths
please refer to the user manual.
For all other technical specifications, operating instructions, service
requirements, contact details and trouble shooting, please refer to
the user manual contained on the CD supplied in the fittings kit.
Please keep this for future reference.
9.
It is very important to register your generator with PEAK SCIENTIFIC. This will initiate your
warranty entitlement. Please use the form on the next page to register your generator. You
will need the generators serial number which can be found on the serial label on the rear of
the generator.
Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK
T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com
Part No. IG-Infinity1051
Rev.
2
Page
Page 4 of 5
Warranty Entitlement
Fountain Crescent
Inchinnan Business Park
Inchinnan, PA4 9RE
Scotland, UK
T: +44 (0)141 812 8100
F: +44 (0)141 812 8200
W: www.peakscientific.com
E: info@peakscientific.com
Part No. IG-Infinity1051
Rev.
2
Page
Page 5 of 5